Datasheet download

Features:

◆ International voltage: 85～265VAC/ 100～375VDC

◆ AC and DC dual-purpose (same terminal input voltage)

◆ Stabilized output, low ripple, noise

◆ Input under-voltage protection, output short-circuit, over-current, over-voltage protection

◆ High efficiency, high power density

◆ Low power consumption, green and environmentally friendly

◆ Full plastic shell, compliant with UL94V-0

　　The Complete Guide to 5W AC-DC power modules: The Ideal Power Solution for Low Power Applications

　　Core value and application scenarios of 5W AC-DC power module

5W AC-DC power module, as a representative of low-power power supply solutions, iscompact size、Efficient energy conversionandExcellent value for moneyPlays an important role in low-power applications. This type of power module is specially designed for application scenarios with strict power consumption requirements. It can safely and stably convert the AC grid voltage into the DC voltage required by the equipment, while ensuring the best electrical performance in a limited space.

Typical application scenarios of 5W power modules include:

　　smart home devices:Smart sockets, smart gateways, thermostats

　　industrial control: PLC module, sensor, relay control

　　communication equipment: Routers, switch modules, network terminals

　　consumer electronics:Small household appliances, charging equipment, portable equipment

　　Analysis of key technical parameters of 5W AC-DC power module

　　Technical parametersSpecification requirementsTechnical description

　　Input voltage range85-264VAC/100-370VDC supports global power grid standards and adapts to voltage fluctuations

　　Output voltage3.3V/5V/12V/15V/24V multiple output voltages available to suit different load requirements

　　Output current0.21A-1.52A automatically adjusts according to the output voltage to ensure stable power

　　Conversion efficiency>75% Typical efficiency 80%, some models can reach 85%

　　Isolation voltage3000VAC enhanced isolation to ensure safe use

　　working temperature-40℃ to +85℃ industrial grade temperature range, suitable for harsh environments

　　Dimensions34mm×22mm×16mm ultra-compact design saves installation space

　　Safety certificationUL/CE/CB certification complies with international safety standards and supports global sales

　　In-depth analysis of common problems of 5W AC-DC power module

　　Q1: How to optimize the heat dissipation design of 5W power modules in space-constrained applications?

Suggestions for optimization of thermal design:

　　Using PCB to dissipate heat: Expand heat dissipation area through PCB copper foil

　　maintain air circulation: Avoid use in confined spaces to ensure natural convection

　　Choose a high-efficiency model: Give priority to products with efficiency >80% to reduce heat generation

　　Installation direction: Keep the module installed upright to facilitate heat dissipation.

　　Q2: How to ensure the stability of the 5W power module in the power grid fluctuation environment?

Stability guarantee measures:

　　Wide voltage input design: Ensure stable operation within the range of 85-264VAC

　　Add protection circuit: It is RECOMmended to add a fuse and varistor at the input end

　　Output filter optimization: Configure the appropriate output capacitor according to the load characteristics.

　　surge protection: Add surge protection devices in areas prone to lightning strikes

　　Q3: What is the energy efficiency of the 5W module under light load conditions?

Analysis of energy efficiency characteristics:

　　Light load efficiency:Typical light load efficiency>70%, better than traditional linear power supply

　　Standby power consumption: No-load power consumption is usually <0.3W, meeting energy-saving requirements

　　load regulation: Voltage stability ±2% within 10%-100% load range

　　dynamic response: Support load mutation, recovery time <200μs

　　Q4: What key points should be paid attention to in the EMC design of 5W power module?

Key points of electromagnetic compatibility design:

　　Built-in filtering: Standard products have built-in basic EMI filters

　　Layout optimization: Minimize the input and output loop area

　　Ground design: Make sure the chassis is well grounded

　　external filtering: Applications with strict EMC requirements can add additional filters

　　5W AC-DC Power Module Troubleshooting Guide

　　Phase One: Rapid Diagnosis

　　Input power check: Confirm that the input voltage is within the specification range

　　Output load verification: Check whether the load exceeds 1A (5V output)

　　Connection status confirmation: Check whether the pin connection is firm

　　Ambient temperature detection: Confirm that the working environment temperature meets the requirements

　　Phase Two: Performance Testing

　　Output voltage accuracy: Measure whether the output voltage deviation is within ±5%

　　Ripple and noise test: Use an oscilloscope to detect ripple (usually <50mV)

　　Startup time test: Verify power-on startup time (typical value <1s)

　　Insulation resistance test: Insulation resistance between input and output >100MΩ

　　The third stage: in-depth analysis

　　Thermal performance analysis: Detect the shell temperature after running at full load for 30 minutes.

　　Waveform analysis: Check whether the switching waveform is normal

　　Protection function verification: Test short circuit protection and overload protection functions

　　Aging test: Carry out 24 hours full load aging test

　　The fourth stage: system troubleshooting

　　Wiring inspection: Confirm that the input and output wire diameter meets the requirements

　　Ground verification: Measure ground continuity

　　Compatibility testing: Verify compatibility with payload equipment

　　environmental adaptability: Check actual working environment conditions

　　5W power module application design and optimization suggestions

　　Circuit design essentials：

　　Input protection: It is recommended to use 1A/250V fuse and 10D471 varistor

　　Output filter: It is recommended to add 100-470μF electrolytic capacitor in parallel with 104 ceramic capacitor

　　EMI suppression: Add common mode inductor and X2 safety capacitor to the input end

　　layout specifications: Follow the straight-line layout principle of "input-conversion-output"

　　Installation and usage specifications：

　　Welding process: Reflow soldering is recommended, the peak temperature does not exceed 260℃

　　Installation distance: Keep at least 3mm distance between the module and surrounding components

　　Insulation treatment: Use insulating spacers when installing metal enclosures

　　Potting recommendations: In special environments, overall potting can be considered to enhance protection.

　　Reliability improvement measures：

　　Use with derating: It is recommended that the actual power used does not exceed 4W

　　Temperature monitoring: It is recommended to monitor module temperature in high temperature environment

　　Regular testing: Establish a regular testing system for key parameters

　　preventive maintenance: Develop maintenance cycles based on the usage environment

　　5W AC-DC power module selection recommendations

When choosing a 5W AC-DC power module, it is recommended to consider the following factors:

　　Certification requirements:Choose the corresponding safety certification according to the target market

　　environmental conditions:Select the appropriate grade according to the working environment temperature

　　Load characteristics: Consider the transient characteristics of the load and the starting current

　　cost budget: Optimize costs while meeting performance requirements

　　Supply guarantee: Choose models and suppliers with stable supply

　　Conclusion

With its exquisite design, reliable performance and excellent cost performance, the 5W AC-DC power module has become an ideal choice for power solutions for low-power equipment. Through correct selection, standardized design and scientific use and maintenance, its performance advantages can be fully utilized to provide stable and reliable power supply for various low-power devices.