Datasheet download

Product features:

◆ Ultra-wide input voltage range: 85-305VAC/100-430VDC

◆ 1×1inch ultra-small size

◆ Operating temperature range: -40℃ to +60℃

◆ Efficiency as high as 81.5%

◆5000m altitude application

◆ Full plastic shell, compliant with UL94V-0

◆ Three-year warranty period

　　The Complete Guide to Cosel AC-DC power modules: Japanese-Quality Industrial Power Solutions

The core advantages of Cosel AC-DC power supply products are reflected in:Conversion efficiency up to 95%, significantly reduce energy consumption and heat loss;Industry-leading power density, achieve maximum power output in a compact space;5-year warranty commitment, demonstrating the excellent reliability of the product;The entire series has passed international certification, meeting the access requirements of markets around the world.

　　Cosel AC-DC Power Supply Product Series Selection Guide

　　Product seriesPower rangeTechnical Highlightstarget application

　　LDA series30-600W efficiency up to 94%, low leakage current <250μA, medical grade safety standard medical equipment, diagnostic instruments

　　LNE series150-960W power density reaches 16.7W/in³, fanless design, operating temperature -40~+85℃ industrial automation, mechanical equipment

　　LBS series15-240W compact design, 2x4 inch standard size, excellent EMC performance communication equipment, network infrastructure

　　LFA series75-480W high efficiency >93%, input power factor correction >0.98, green environmental testing and measurement, laboratory equipment

　　Professional analysis of common technical problems of Cosel power supply

　　Q1: What are the special advantages of Cosel power modules in medical equipment applications?

Unique advantages in medical applications:

　　Low leakage current design: Ensure patient safety, typical value <250μA

　　Medical grade certification: Passed medical equipment safety standards such as UL/EN 60601-1

　　High reliability: MTBF exceeds 1 million hours to ensure continuous operation of the equipment

　　Low noise characteristics: Excellent EMI performance, does not affect sensitive medical instruments

　　Q2: How to give full play to the high efficiency characteristics of Cosel power modules?

Suggestions for efficiency optimization:

　　Thermal design optimization: Utilizing high efficiency characteristics to reduce heat sink size

　　System layout: Ensure sufficient ventilation space to maintain low temperature rise

　　Load matching: Used near the best efficiency point (usually 50-75% load)

　　Input voltage selection: Best efficiency is obtained within the rated input voltage range

　　Q3: What are the advantages of the power factor correction function of Cosel power supply?

PFC technology advantages:

　　High power factor: Typical value >0.98, reducing harmonic pollution of the power grid

　　wide input voltage:Supports 85-264VAC global voltage range

　　Green and environmentally friendly: Comply with ENERGY STAR, ErP and other energy efficiency standards

　　Grid friendly: Reduce interference to the power grid and improve power quality

　　Q4: How is the reliability of Cosel power modules reflected in practical applications?

Reliability guarantee measures:

　　Rigorous testing: 100% full load aging test, high temperature load test

　　High quality components: Using Japanese brand components to extend service life

　　Redundant design: Key parameter derating design to improve safety margin

　　Long term supply: Product life cycle support to ensure long-term supply

　　Cosel power system troubleshooting process

　　Phase One: Initial Diagnosis

　　status light: Check POWER/FAULT LED status indication

　　Input power quality: Measure input voltage waveform and amplitude

　　Load characteristic analysis: Confirm the matching between load characteristics and power supply

　　environmental condition assessment: Record temperature, humidity and other environmental parameters

　　Stage Two: Detailed Inspection

　　Output voltage accuracy: Measure output voltage stability (usually ±2%)

　　Dynamic response testing: Verify load transient response characteristics

　　Protection function verification: Test OVP, OCP, OTP protection thresholds

　　Ripple noise measurement: Use professional methods to detect output noise

　　The third stage: in-depth analysis

　　Heat distribution detection: Infrared thermal imaging camera analyzes temperature distribution

　　Switching waveform analysis: Detect power tube switching waveform

　　Component stress analysis:Assess the working stress of key components

　　Life Assessment Test: Life prediction analysis based on temperature

　　Phase 4: System Verification

　　Grounding system inspection: Verify ground impedance and ground quality

　　EMC performance verification: Test electromagnetic compatibility performance

　　System compatibility: Verify compatibility with load equipment

　　environmental adaptability: Verify reliability in actual working environment

　　Cosel Power Application Best Practices

　　Key points in the design phase：

　　Derating design: The power is derated by 30% and the voltage is derated by 20% to ensure reliability.

　　protection circuit: Configure appropriate protection circuits according to application requirements

　　Thermal management: Perform detailed thermal simulation analysis

　　Layout optimization: Follow the layout RECOMmendations from the Cosel technical manual

　　Installation and debugging specifications：

　　Mechanical installation: Make sure the installation is firm and the contact surface conducts heat well.

　　Electrical connection: Use recommended wire diameter to ensure connection reliability

　　Debugging process: Debugging in the order of no load → light load → full load

　　Test verification: Conduct 72 hours full load aging test

　　Maintenance management strategy：

　　preventive maintenance: Develop a quarterly inspection plan

　　Parameter monitoring: Establish key parameter monitoring records

　　life management: Life prediction based on running time

　　Spare parts management: Establish key spare parts inventory management system

　　Cosel technical support and service advantages

Cosel provides a comprehensive technical support system:

　　Technical consultation: Senior engineers provide professional technical support

　　design services: Provide customized solutions and reference designs

　　Sample service: Rapid sample request and evaluation support

　　training services: Regularly hold product application technology seminars

　　Documentation support: Provide complete technical documentation and design information

　　Conclusion

Cosel AC-DC power modules have become an ideal choice for high-end industrial applications due to their excellent Japanese quality reliability, leading technical performance and comprehensive technical support. Through correct product selection, standardized design and installation, and scientific maintenance management, users can give full play to the technical advantages of Cosel power products and provide stable and reliable power supply for key application systems.